Free shipping on complete systems. Most orders ship within 1–3 business days. Local pickup available at our Ocala, FL warehouse for additional savings.

Warranty Information

All units come with full manufacturer warranty covering parts. Register your warranty within 60 days of purchase for extended coverage.

R-32 Refrigerant Single-Stage Scroll 10-Year Parts Warranty 208/230V Single-Phase

Performance at a Glance

3.0

Ton

Cooling Capacity

36,000

BTU/h

Cooling Output

14.3

SEER2

Up to (AHRI-matched)

Sound Level

R-32

Refrigerant

Key Features

Why this condenser works

R-32 Refrigerant — Built for What's Next

R-32 is the new residential refrigerant standard, replacing R-410A. It runs up to 10% more efficient, uses about 30% less charge per system, and meets today's EPA AIM Act rules. This condenser is built for it from day one.

Single-Stage Scroll Compressor

A proven scroll compressor does the heavy lifting. Fewer moving parts than old piston designs. Smooth, quiet, and built to run for years without complaints.

14.3 SEER2 Efficiency

Rated up to 14.3 SEER2 when matched with an AHRI-certified indoor coil. Your actual SEER2 depends on the pairing, so use a matched system to hit the number.

Built to Take It

Heavy-gauge galvanized steel cabinet. Louvered coil guard to shield internal components from impact and debris. Built for long-term outdoor installation in real American weather — sun, storms, and everything in between.

Service-Friendly When It Matters

Single-panel access, clearly labeled wiring, and standard 3/8" liquid / 7/8" suction line connections. Less time on your roof means lower service bills.

Backed by Ace Air

10-Year Parts Limited Warranty and 10-Year Compressor Limited Warranty when registered within 60 days of installation. Simple, documented, backed.

The GLXS4B air conditioner condenser delivers 3.0 ton of cooling capacity (36,000 BTU) at 14.3 SEER2 efficiency, running on R-32 refrigerant. The cabinet is factory-charged with enough refrigerant for 15 feet of line set to simplify installation, and the high-density foam compressor mounting reduces operating sound. AHRI Certified and ETL Listed.

Energy-efficient compressor — high-density foam compressor mounting with Advanced Copeland® scroll technology for quiet, reliable operation.
Pre-charged with R-32 refrigerant — factory-charged for 15 feet of tubing to reduce installation time.
Copper tube / enhanced aluminum fin coil — 5mm-diameter design improves heat transfer and reduces refrigerant volume.
Factory-installed filter drier — removes moisture and contaminants from the refrigerant circuit at startup.
Sweat-connection service valves — easy-access gauge ports for installation and seasonal service.
High-pressure switch — shuts the compressor down on abnormal pressure to protect the system.
Enclosed contactor with ground lug — secure electrical connections in a sealed compartment.
Capacitors with extended life — rated for long service in high-temperature operating conditions.

Why R-32 Refrigerant?

The GLXS4BA3610A uses R-32 — here's how it compares to the outgoing R-410A standard

Feature	R-32 (This Unit)	R-410A (Old Standard)
Energy Efficiency	Up to 10% higher	Baseline
Refrigerant Charge Required	Up to 30% less	Standard
Thermodynamic Performance	Superior heat transfer	Standard
Regulatory Status	Future-ready	AIM Act phase-down

How Quiet Is It?

How the GLXS4BA3610A compares to everyday sounds.

60 dB

Normal Conversation

Quiet indoor setting

This Unit

67 dB

GLXS4BA3610A

Operating sound level

85 dB

Lawn Mower

From 50 ft · Clearly loud

Complete Specifications

AAD-GLXS4BA3610A — 3.0 Ton Up to 14.3 SEER2 R-32 Air Conditioner Condenser

Capacity & Efficiency
Model Number	GLXS4BA3610A
Nominal Cooling Capacity	3.0 Ton
Cooling Capacity (BTU/h)	36,000
SEER2 Rating	14.3
Compressor Type	Single-Stage Scroll
Refrigerant	R-32
Factory Refrigerant Charge	69 oz
Electrical
Voltage	208/230V/1-Phase / 60 Hz
Min / Max Volts	197/253
Minimum Circuit Ampacity (MCA)	17.8 A
Maximum Overcurrent Protection (MOCP)	30 A
Rated Load Amps (RLA)	13.4
Locked Rotor Amps (LRA)	83.3
Condenser Fan FLA	0.95
Conduit Size	1/2" or 3/4"
Line Set & Connections
Liquid Line Size	3/8"
Suction Line Size	7/8"
Physical
Equipment Weight	158 lbs
Shipping Weight	173 lbs
Sound Level	67 dB

Dimensions

39-1/2″

Height

29″

Width

29″

Depth

158 lbs

Unit Weight

Warranty Coverage

Coverage that kicks in at registration

Year Parts Limited Warranty

Year Compressor Limited Warranty

Year Unit Replacement Limited Warranty

Documentation

Manufacturer spec sheets for this product

AC Condenser Spec Sheet
PDF — Tap to download

Frequently Asked Questions

What size home does a 3.0-ton condenser cool?

3.0-ton units typically handle homes in the 1,500–2,000 sq. ft. range. Your climate, insulation, window area, and ceiling height all change the math — a professional Manual J load calculation is the right way to size for your specific home.

What is SEER2?

SEER2 is the DOE's current cooling efficiency rating — a 2023 update that uses more realistic test conditions than the old SEER standard. Higher number means lower summer electric bills. The AAD-GLXS4BA3610A rates at up to 14.3 SEER2.

What is R-32 refrigerant and why the switch from R-410A?

R-32 is replacing R-410A as the standard residential refrigerant. It runs more efficiently, uses roughly 30% less charge per system, and has a lower climate impact. The EPA and AIM Act are phasing out R-410A — R-32 is the direction the whole industry is going.

Can I pair this condenser with my existing indoor coil or air handler?

Only if your indoor unit is R-32. R-32 and R-410A run at different pressures with different oils — mix them and you'll damage the equipment and void the warranty. For rated 14.3 SEER2 performance, use an AHRI-certified matched R-32 coil or air handler.

Do I need AHRI-certified matching?

The 14.3 SEER2 rating applies to specific matched component combinations. Install this condenser with a non-matched coil and you won't hit the rated efficiency. You may also run into warranty issues and local code problems. Always install as an AHRI-certified matched system.

How loud is 67 dB in practical terms?

67 dB is in normal range for a 3.0-ton residential condenser. For reference: normal conversation is around 60 dB, a dishwasher runs around 70 dB, a gas lawn mower hits 85 dB from 50 ft. Install away from bedroom windows and patios when you can, and keep the clearance requirements in mind for airflow.

What maintenance does the condenser need?

Keep the outdoor coil clear of leaves, grass clippings, and dryer lint. Maintain at least 24 inches of clearance on all sides for airflow. Get a licensed HVAC tech out for an annual tune-up — coil cleaning, refrigerant charge check, electrical inspection. Regular maintenance protects efficiency and extends equipment life.

How do I register for the 10-year warranty?

Register at Ace Air's warranty page within 60 days of installation. You need: model number (AAD-GLXS4BA3610A), serial number (from the data plate), install date, and installing contractor info. Miss the 60-day window and you drop to the shorter base warranty.