Oxbox

Oxbox By Trane 4.0 Ton 15.2 SEER2 R454B Air Conditioner Split System | J5AC5048A1000AA-J5AH5E60A1C00AA-5JAYHTR1A10BKA

SKU: J5AC5048A1000AA-J5AH5E60A1C00AA-5JAYHTR1A10BKA
4.0 Ton15.2 SEER2Electric HeatR454B
$3,467.00
Free Shipping
Full Warranty
Expert Support
Shipping & Delivery
Free shipping on complete systems. Most orders ship within 1–3 business days. Local pickup available at our Ocala, FL warehouse for additional savings.
Warranty Information
All units come with full manufacturer warranty covering parts. Register your warranty within 60 days of purchase for extended coverage.
R-454B Refrigerant 4 Ton · 15.2 SEER2 AC 10 kW Heat Kit Included Up to 10-Year Parts Warranty 208/230V Single-Phase

Performance at a Glance

4.0
Ton
Nominal Capacity
15.2
SEER2
Cooling Efficiency
10
kW
Electric Heat
73
dB
Outdoor Sound Rating

Straightforward comfort for a larger home: a 4 ton Oxbox air conditioner, a matched upflow air handler, and a 10 kW electric heat kit, all shipped together.

Key Features

At 4 tons and 15.2 SEER2, this Oxbox air conditioner system sits in Oxbox's higher efficiency tier. The extra efficiency pays off most where the system runs for much of the year. Heating comes from the included 10 kW electric heat strip inside the air handler, a simple setup for areas with short, mild winters. This matchup uses the J5AH5E60A1C00AA air handler, an upflow unit with a 3/4 HP blower motor. It is a practical match for larger homes, pending a load calculation from your installer. It uses R-454B refrigerant on standard 208/230V single-phase power and is approved for both DOE North and South regions.

  • Scroll compressor: a proven compressor design known for smooth, steady operation and long service life.
  • R-454B refrigerant: the low-GWP A2L refrigerant replacing R-410A in new residential equipment.
  • 10 kW electric heat kit, included: gives you dependable heat from the same air handler, ideal where winters are short and mild.
  • Upflow air handler with built-in evaporator coil: matched to this outdoor unit, with a 3/4 HP blower motor moving air through your ductwork.
  • 73 dB sound rating: the outdoor unit's published sound level, useful for planning placement near bedrooms, patios, or neighbors.
  • 15.2 SEER2 efficiency: Oxbox's higher efficiency tier, for lower operating costs through long cooling seasons.

What's Included in This System

Three matched components shipped as one system

1
Outdoor Condenser
J5AC5048A1000AA
The outdoor half of the system. Houses the scroll compressor, outdoor coil, and condenser fan, and rejects the heat pulled from your home.
  • Tonnage4 Ton
  • SEER2 Rating15.2
  • CompressorScroll
  • RefrigerantR-454B
  • Sound Rating73 dB
2
Indoor Air Handler
J5AH5E60A1C00AA
Indoor unit with built-in evaporator coil and blower. Moves conditioned air through your ducts and houses the electric heat kit.
  • AirflowUpflow
  • Blower Motor3/4 HP
  • Blower FLA4.5 A
  • RefrigerantR-454B
3
Electric Heat Kit
5JAYHTR1A10BKA
Electric heat strip made for the air handler. Supplies the system's heating, so you get warm air through the same ducts that carry your cooling.
  • Heat Output10 kW
  • Mounts InAir Handler
  • RolePrimary Electric Heat

Specifications

System
System Type Air Conditioner Split System
Nominal Capacity 4 Ton
SEER2 Rating 15.2
Refrigerant R-454B
Heating 10 kW electric heat (included)
DOE Regions North & South
Outdoor Unit Electrical
Voltage 208/230V, Single Phase
Minimum Circuit Ampacity (MCA) 29.1 A
Compressor RLA 21.6 A
Compressor LRA 95 A
Condenser Fan Motor 1/3 HP · 2.1 FLA
Indoor Unit & Refrigerant Lines
Air Handler Airflow Upflow
Blower Motor 3/4 HP · 4.5 FLA
Liquid Line 3/8"

Warranty

Backed by Oxbox's manufacturer warranty

5
Year Parts (Standard)
10
Year Parts (When Registered)

Register your system with Oxbox after installation to extend parts coverage from 5 to 10 years. See Oxbox's official warranty documents for complete terms and conditions.

Common Questions

What comes in the box, and what do I still need?
You get the outdoor condenser, the indoor air handler, and the 10 kW heat kit. You'll still need a copper line set sized for your run, a condenser pad, an outdoor disconnect, electrical wiring, and a thermostat. Professional installation by a licensed HVAC technician is required for refrigerant work.
How does this system heat?
This is an air conditioner, so heating comes from the included 10 kW electric heat strip inside the air handler. It's a simple, reliable setup for areas with short, mild winters. If you heat for much of the year, a heat pump system will usually cost less to run.
Is 4 tons the right size for my home?
4 tons is a common fit for larger homes, but square footage alone isn't a reliable guide. Insulation, windows, sun exposure, and ductwork all matter. A Manual J load calculation from your installer is the best way to confirm sizing before you buy.
How do I get the 10-year parts warranty?
Coverage is 5 years on parts as standard. Register the system with Oxbox after installation to extend parts coverage to 10 years.