Oxbox By Trane 3.5 Ton 15.2 SEER2 R454B Heat Pump Split System | J5HP5042A1000AA-J5AH5E60A1C00AA-5JAYHTR1A08BKA
Shipping & Delivery
Warranty Information
Performance at a Glance
One outdoor unit for summer and winter. This Oxbox 3.5 ton heat pump system ships with its matched upflow air handler and an 8 kW heat kit, ready to heat and cool mid-size to larger homes.
Key Features
At 3.5 tons and 15.2 SEER2, this Oxbox heat pump system sits in Oxbox's higher efficiency tier. That's a step above minimum efficiency, which adds up in hot climates. The heat pump handles both heating and cooling, and the 8 kW heat kit in the air handler steps in when outdoor temperatures drop or the system goes through defrost. This matchup uses the J5AH5E60A1C00AA air handler, an upflow unit with a 3/4 HP blower motor. The 3.5 ton capacity puts it in the range typically used for mid-size to larger homes. It uses R-454B refrigerant on standard 208/230V single-phase power and is approved for both DOE North and South regions.
- Heating and cooling from one outdoor unit: the reversing heat pump replaces a separate furnace in most mild-winter climates, so there's one system to service instead of two.
- 8 kW auxiliary heat kit, included: installs inside the air handler and steps in automatically when the heat pump needs help or during defrost. No separate purchase to track down.
- Upflow air handler with built-in evaporator coil: matched to this outdoor unit, with a 3/4 HP blower motor moving air through your ductwork.
- 15.2 SEER2 efficiency: Oxbox's higher efficiency tier, for lower operating costs through long cooling seasons.
- Straightforward electrical: 26.2 A minimum circuit ampacity on the outdoor unit keeps breaker and wire sizing simple for a 3.5 ton install.
- Scroll compressor: a proven compressor design known for smooth, steady operation and long service life.
- R-454B refrigerant: the low-GWP A2L refrigerant replacing R-410A in new residential equipment.
What's Included in This System
Three matched components shipped as one system
- Tonnage3.5 Ton
- SEER2 Rating15.2
- CompressorScroll
- RefrigerantR-454B
- Sound Rating74 dB
- AirflowUpflow
- Blower Motor3/4 HP
- Blower FLA4.5 A
- RefrigerantR-454B
- Heat Output8 kW
- Mounts InAir Handler
- RoleAuxiliary / Emergency Heat
Specifications
| System | |
|---|---|
| System Type | Heat Pump Split System |
| Nominal Capacity | 3.5 Ton |
| SEER2 Rating | 15.2 |
| Refrigerant | R-454B |
| Heating | Heat pump, with 8 kW electric auxiliary heat (included) |
| DOE Regions | North & South |
| Outdoor Unit Electrical | |
| Voltage | 208/230V, Single Phase |
| Minimum Circuit Ampacity (MCA) | 26.2 A |
| Compressor RLA | 19.6 A |
| Compressor LRA | 96 A |
| Condenser Fan Motor | 1/3 HP · 1.7 FLA |
| Indoor Unit & Refrigerant Lines | |
| Air Handler Airflow | Upflow |
| Blower Motor | 3/4 HP · 4.5 FLA |
| Liquid Line | 3/8" |
Warranty
Backed by Oxbox's manufacturer warranty
Register your system with Oxbox after installation to extend parts coverage from 5 to 10 years. See Oxbox's official warranty documents for complete terms and conditions.